Table of specifications

Technology:	active infrared
Detection mode:	opening and presence
Detection zone: (mounting height 2 m; tilt angle 20°)	1 m (W) x 1.2 m (D) 15 independent IR-spots with a diameter of typ. 130 mm
Reaction time:	< 100 ms
Supply voltage:	12V - 30V AC ±10%; 12V - 45V DC ±10%
Mains frequency:	50 - 60 Hz
Power consumption:	< 3 W (VA)
Output: Max. contact voltage: Max. contact current: Max. switching power:	relay (free of potential change-over contact) 42 V AC - 60 V DC 1A (resistive) 30 W (DC) / 42 VA (AC)
Connection on sensor side:	unpluggable integrated 7-pin connector
Hold time:	0.5 s to 9 s (adjustable)
LED-signal:	red and orange
Mounting height:	max. 2.5 m (flush-mounting)
Degree of protection:	IP41
Temperature range:	-25 °C to + 55 °C (operating); -30 °C to + 60 °C (storage)
Dimensions:	140 mm (W) x 38 mm (H) x 55 mm (D)
Tilt angles:	0° to 16° vertical in steps of 4°
Material:	PC
Weight:	100 g
Norm conformity (sensor without cable):	EN 50155 (if nominal supply voltage is 24 V) EN 45545-2; NF F16-101; EN 50121-3-2; EN 50581
Norm conformity (cable):	EN 45545-2; EN 50581

Specifications are subject to changes without prior notice – Measured in specific conditions.

Follow us on